What Are Todos?
Todos are tasks your group (the parent organization that oversees all locals, for example a state-level body or a national association) assigns out to the locals, districts, and regions beneath it. You create the task once, choose who has to do it, and then watch on one screen as each of them moves it from New to In Progress to Complete.
This replaces the usual routine of sending a reminder letter and then keeping a spreadsheet of who answered. The task lives in the system, it shows up on the recipient's dashboard, and the count of who is finished is always current.
This guide is for parent group, region, and district users who assign todos, and for local officers who mark them done.
Common uses are annual returns, officer reports, audit paperwork, dues remittance, and anything else the group asks every local to do by a date.
Todos are on for every organization. There is nothing to turn on and nothing to request.
Who Sees What
Todos look different depending on which role you are signed in under, and this trips people up. There are two views.
| If you are signed in as | You see | You can |
|---|---|---|
| A group, region, or district user | Every open todo your group created, with a count of how many recipients are in each status | Create todos, edit them, close them, reopen them, and change any recipient's status |
| A local officer | Only the todos assigned to your local, your district, or your region | Change the status to New, In Progress, or Complete |
A local officer has no button to create or close a todo. The local's screen is a short list of what the local owes.
A todo sent to a whole district or region has one shared status for that district or region. If one local clicks a status button on it, the status changes for every local in that district or region.
How to Get There
From the main menu, click Todos.
That is the whole navigation. Todos is a top-level menu item, not buried under another heading.
Creating a Todo
- From the main menu, click Todos.
- Click the menu icon in the header of the Todos card.
- Click New Todo.
- On the New Todo screen, fill in the fields.
| Field | Required | Notes |
|---|---|---|
| Name | Yes | What the recipients see in their list. Write it as the task, for example 2026 Annual Return rather than Annual Return Notice From The Grand Secretary. Short names read better in a list. |
| Description | No | The full instructions. This is a formatting box, so you can use bold, bullet lists, and links to spell out what you want and where to send it. |
| Due Date | Yes | Type the date as MM/DD/YYYY. The slashes fill in as you type. The date drives the overdue warnings described below. |
| Assign To | Yes | Who has to do it. See below. |
- In the Assign To box, choose the recipients. The list is grouped into Group, Regions, Districts, and Locals. Hold the Ctrl key (or Cmd on a Mac) while clicking to select more than one.
- Group assigns the todo to the group office itself. No local sees a todo assigned only to Group.
- To reach every local, select them all under Locals: click the first local, then hold Shift and click the last one. Only active locals are listed.
- On Grand Lodge sites the first heading reads Grand Lodge/Group. Some organizations use their own word for Regions or Districts, such as Areas.
- Click Save.
You land on the todo's detail screen, and the system confirms with Todo created successfully.
You have to choose at least one recipient. If you save without picking anyone, the screen returns with "At least one entity must be assigned." Your other fields are kept, so pick the recipients and save again. If the save fails because Name or Due Date is missing, the recipients you picked are cleared, so pick them again too.
Choose the recipients carefully, because the Assign To box is only on the New Todo screen. To edit a todo, open it and click the pencil icon (Edit Todo). You can change the name, the description, and the due date, but not the list of who it went to. Saving returns you to the Todos list with Todo updated successfully. You can still edit a todo after it is closed. If you assigned it to the wrong locals, close it and create a new one. There is no way to delete a todo.
Watching Who Has Finished
Click Todos in the main menu. The list shows every open todo your group created. If there are none, it says No todos found.
| Column | What it shows |
|---|---|
| Name | Click it to open the todo |
| Assigned To | The recipient's name if you assigned it to one, or a count such as 47 entities if you assigned it to many |
| Due Date | The date you set |
| New | How many recipients have not started |
| In Progress | How many have started |
| Complete | How many are finished |
The list starts in due date order, soonest first. Click any column heading to sort by that column instead. Your browser remembers the sort you chose.
The group dashboard shows the same information in short form: the Action Items card has an Incomplete Todos row with the number of recipients not yet Complete on open todos. Click it to go to the Todos list.
For a todo that went to a single recipient, the three status columns show a green check mark in whichever one applies rather than a count.
The detail screen
Click a todo's name to open it. You get:
- A doughnut chart on the left breaking the recipients into New, In Progress, and Complete. This is the picture to put in front of a committee.
- The due date and description on the right. A closed todo also shows Closed: Yes here.
- An Assignments table listing every recipient by name with their current status.
Each recipient's name in the Assignments table is a link to that local, district, or region, which is the fastest way to look up who to call about the ones that have not moved.
Overdue
Once the due date has passed, any recipient who is not Complete shows a status of Overdue instead of New or In Progress. You do not set this and you cannot turn it off. It changes on its own when the date passes. In the list's counts and in the chart, an overdue recipient is still counted under New or In Progress.
Changing Someone's Status for Them
Locals will call the office and say they have sent the thing in. You can record that yourself.
- Open the todo.
- In the Assignments table, find the recipient's row.
- Click New, In Progress, or Complete.
The button for the status they are already in is not shown, so the buttons you see are the ones you can move them to. The change saves right away and the screen confirms with Status updated.
Closing and Reopening a Todo
Closing a todo takes it off the group's list and off the dashboard cards. It does not delete anything and the history stays intact.
To close one:
- Open the todo.
- Click Close Todo, below the description.
The screen confirms with Todo closed. The todo moves to the closed list, and the status buttons disappear for everyone. Recipients can no longer change their status, which is the point: closing freezes the record of who finished and who did not. A local that had not finished still sees the closed todo in its own Todos list, with its status and no buttons.
To see closed todos:
- From the main menu, click Todos.
- Click the menu icon in the header of the Todos card. (The menu icon just above the table chooses which columns show.)
- Click Closed Todos.
To return to the open list, click the back arrow at the left of the Closed Todos header.
To reopen one:
- Open the closed todo, either from the closed list or from a link.
- Click Reopen Todo.
The screen confirms with Todo reopened. It returns to the open list with every recipient's status exactly as it was.
A todo does not close itself when everyone finishes. Somebody has to close it. Checking the list for todos where the Complete count matches the number of recipients is a reasonable monthly habit.
What a Local Officer Sees
When a local officer signs in and clicks Todos, they see a short list: the name, their status, the due date, and buttons to change the status. The button for the current status is hidden.
To update their status, they click New, In Progress, or Complete right from that list. There is nothing to save.
Complete takes the todo off the local's list and dashboard card, and the local cannot undo it. If a local clicks Complete by mistake, the group office sets the status back on the todo's Assignments table.
They can also click the todo's name to open it and read the full description, with the same buttons at the bottom.
Todos also appear on their dashboard. An Incomplete Todos card on the local dashboard lists the todos assigned to that local, with name, due date, and status. A todo assigned to a district or region shows on the card on that district's or region's page instead, though it still appears in each local's Todos list. The card is hidden when nothing is incomplete. Two things to know about that card:
- The whole card changes to a warning color when anything on it is overdue or due within the next 30 days.
- An overdue date shows in red.
This is how most local officers find out about a todo, so it is worth telling them to look for it.
Good to Know
- Creating a todo does not send an email or a text. Nothing goes out. The todo appears in the recipient's list and on their dashboard, and that is the whole notification. If a task matters, send your usual announcement as well and tell people it is waiting for them under Todos.
- Todos are assigned to a local, not to a person. Any officer at that local with access can move the status. There is no way to name an individual as the one responsible.
- A due date is required. You cannot create a todo without one. Pick a real date rather than a placeholder, because the overdue marking and the 30-day dashboard warning both work off it.
- Editing is safe. Changing the name, description, or due date does not reset anyone's status.
- Watch how many you have open at once. The value of the Incomplete Todos card on a local dashboard falls off quickly if it has fifteen things on it. Close the ones that are finished.
Troubleshooting
"At least one entity must be assigned." You saved the New Todo screen without picking anyone in Assign To. Select at least one recipient and save again. What you already typed is still there.
I cannot find the Assign To box when editing. It is only on the New Todo screen. Recipients are set once, when the todo is created. To send the same task to a different set of locals, create a second todo.
A local says they finished but the count did not move. Open the todo and check that recipient's row in the Assignments table. If it still says New or In Progress, nobody at the local clicked the button. Click Complete on their row yourself.
A local cannot see the todo I assigned. Check the Assignments table on the todo and confirm their local is actually on the list. Also check whether you assigned it to their district or region instead of the local itself. A district or region todo is in the local's Todos list but not on the local's dashboard card. A todo assigned only to Group reaches no local at all.
A status says Overdue and I did not set that. Overdue is calculated. Any recipient who is not Complete after the due date passes shows as Overdue. Moving them to Complete, or changing the due date, clears it.
The todo disappeared from my list. It was probably closed. Open the menu icon on the Todos card and click Closed Todos.
Glossary
Group: The parent organization that oversees all locals, districts, and regions. Examples include a state-level governing body, a national association, or a political party.
Region: A larger organizational area that contains one or more districts.
District: An organizational grouping of locals, typically within a region.
Local: An individual unit within your organization where members hold their primary membership. Depending on your organization, this might correspond to a lodge, chapter, local committee, or similar body.
Todo: A task created by the group and assigned to the group itself or to one or more locals, districts, or regions, with a due date and a status.
Assignment: One recipient's copy of a todo. A todo sent to forty locals has forty assignments, each with its own status.
Status: Where one recipient stands on a todo: New, In Progress, or Complete. A recipient who is not Complete after the due date displays as Overdue.